Onity hotel key cards are used in hotels, resorts and hospitality properties around the world for contactless guest room access and other controlled areas.
However, purchasing replacement or customized Onity RFID key cards requires more than choosing a card labeled “Onity compatible.”
Onity has supplied hotel locking systems for decades, which means properties may operate different generations of locks, software platforms, encoders and RFID credential technologies.
Current Onity Trillium RFID locks can support several MIFARE credential technologies, while older properties may still operate earlier Onity locking systems.
For this reason, the correct Onity hotel key card should always be selected according to the actual system installed at the property.
This guide explains Onity hotel key card compatibility, common RFID technologies, Trillium RFID locks, OnPortal access management, mobile access, card materials and the information buyers should confirm before ordering.
Table of Contents
ToggleWhat Is an Onity Hotel Key Card?
An Onity hotel key card is a physical credential used with compatible Onity electronic locking and access-control systems.
In an RFID installation, the card contains a contactless RFID chip and antenna.
Hotel staff issue the credential using the property’s access management software and card encoder. The guest can then present the card near an authorized lock or reader.
Depending on the hotel system, an Onity credential may provide access to:
Guest rooms
Suites
Main entrances
Elevators
Fitness centers
Swimming pools
Parking areas
Executive lounges
Meeting spaces
Other controlled areas
Modern Onity environments can support both physical RFID credentials and mobile access.
Are All Onity Hotel Key Cards the Same?
No.
This is the first thing hotel buyers should understand.
Onity is the access-control brand, not a single hotel key card specification.
Different Onity installations may use different:
Lock models
RFID technologies
Card chips
Access management software
Encoders
Security configurations
Credential formats
Mobile access options
A hotel using a current Trillium RFID installation may require a different credential from a property operating an older Onity system.
Therefore, an RFQ saying:
“Please quote Onity key cards”
is usually not enough information for reliable card selection.
A better request includes:
Onity lock model
Access management software
Existing working card
RFID chip if known
Encoder model
Required quantity
Understanding Onity Trillium RFID Locks
Trillium RFID is one of Onity’s current contactless hotel lock platforms.
The system is designed for both new installations and upgrades from certain existing Onity locking systems.
Current Trillium RFID specifications list support for multiple MIFARE credential technologies, including:
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE Ultralight C
This immediately demonstrates why there is no single universal “Onity RFID card.”
Even within one current lock platform, different credential technologies can be used.
Onity Trillium and Trillium ADVANCE
Onity offers Trillium RFID in different physical lock configurations.
Trillium uses a one-piece design, while Trillium ADVANCE is designed around a two-piece configuration.
From a key card purchasing perspective, the more important issue is not the cosmetic difference between the lock designs.
The important questions are:
Which reader technology is installed?
Which RFID credential is currently used?
Which Onity software manages the system?
Has the hotel enabled an enhanced credential security configuration?
A photograph of the lock is useful, but the system specification is even more useful.
Onity OnPortal Access Management
OnPortal is Onity’s lock and access management platform for hospitality environments.
It can be used alongside hotel property management systems and supports both physical RFID key cards and mobile credentials.
For physical card issuing, OnPortal works with compatible RFID encoders.
This means hotel key card compatibility should be evaluated across the entire issuing process:
OnPortal → Encoder → RFID Credential → Hotel Lock
A card that responds correctly to a generic RFID reader still needs to work correctly through this complete hotel workflow.
Onity Compact RFID Encoder
Onity provides a Compact RFID Encoder designed to work with OnPortal.
Current Onity information lists support for:
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE Ultralight C
The encoder operates in the 13.56 MHz contactless environment and connects to the OnPortal system.
For purchasing departments, the encoder model is valuable information when trying to identify an unknown hotel key card.
If you are unsure what credential your property uses, photograph the encoder and its labels.
Which RFID Chips Does Onity Use?
Different Onity RFID installations may use different MIFARE chip families.
Common technologies documented for current Onity RFID systems include:
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE Ultralight C
However, this list should not be interpreted as meaning all four card types are interchangeable.
They are not.
The correct credential depends on the system configuration.
MIFARE Classic Onity Key Cards
MIFARE Classic has been widely used in contactless access-control systems for many years.
Some Onity installations may use MIFARE Classic credentials.
Current Trillium RFID readers continue to list MIFARE Classic among their supported card technologies.
For an existing property already operating Classic credentials, the current working card should be used as the starting reference for replacement orders.
Do not automatically change the hotel to a newer RFID chip simply because a newer technology exists.
A credential migration should be evaluated as a system change rather than a normal card reorder.
MIFARE Plus Onity Hotel Key Cards
MIFARE Plus is particularly important in current Onity systems because Trillium RFID supports an enhanced credential security option using MIFARE Plus technology.
Onity describes an upgrade path from MIFARE Classic to MIFARE Plus mode on compatible Trillium RFID installations.
This can provide hotels with a path toward enhanced credential security without treating the entire lock system as disposable equipment.
However, hotels should not independently replace Classic cards with Plus cards without confirming that the installed system has been configured appropriately.
The upgrade involves the access-control environment, not merely purchasing a different piece of plastic.
MIFARE Ultralight Onity Key Cards
MIFARE Ultralight is another credential technology supported by current Onity RFID systems.
Ultralight products are commonly used where relatively simple contactless credentials are appropriate.
If your existing Onity hotel card is based on MIFARE Ultralight, confirm the exact product specification before reordering.
The word “Ultralight” alone may not provide enough detail because multiple generations and variants exist within the product family.
MIFARE Ultralight C Onity Key Cards
Onity also lists MIFARE Ultralight C among the credential technologies supported by Trillium RFID and its OnPortal RFID encoder.
Hotels using Ultralight C credentials should maintain the approved technical specification when ordering replacements.
If a supplier proposes a substitute chip, compatibility should be verified before production.
A similar product name is not a compatibility certificate.
MIFARE Classic vs MIFARE Plus for Onity
Hotels with compatible Trillium RFID installations may encounter a choice between established MIFARE Classic credentials and enhanced MIFARE Plus operation.
At a simplified level:
| Item | MIFARE Classic | MIFARE Plus |
|---|---|---|
| Common in existing installations | Yes | Yes |
| Supported by Trillium RFID | Yes | Yes |
| Enhanced credential security option | More limited | Available in compatible configuration |
| Direct replacement without system review | Not recommended | Not recommended |
| Sample testing | Recommended | Recommended |
The table does not mean a hotel can freely switch between the two.
System configuration needs to be confirmed first.
Why 13.56 MHz Does Not Guarantee Onity Compatibility
Many Onity RFID credentials operate at 13.56 MHz.
But frequency alone does not determine whether a card will work.
Many contactless cards use the same frequency while containing completely different:
Chips
Memory
Security features
Application structures
Credential configurations
Therefore:
13.56 MHz is only one part of the specification.
An inquiry saying:
“Need 13.56 MHz Onity cards”
still requires additional technical information.
Why MIFARE Does Not Mean One Card
“MIFARE” is another term that frequently creates confusion.
MIFARE is a family of contactless credential technologies rather than one universal card.
For an Onity project, a buyer should identify whether the existing credential uses:
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE Ultralight C
Another approved credential
Then verify the exact card specification.
Never assume that all cards carrying the MIFARE name can replace one another.
How to Identify Your Existing Onity Hotel Key Card
If the purchasing department does not know which Onity card the hotel uses, collect information systematically.
Identify the Lock
Look for:
Onity branding
Lock model
Reader style
Product labels
Hotel engineering records
Take clear photographs.
Identify the Access Management Software
Determine whether the hotel uses OnPortal or another Onity management platform.
Record the software version where possible.
Identify the Encoder
Photograph:
Encoder front
Encoder back
Product label
Model number
Keep Existing Working Cards
Keep several known working hotel cards.
These are extremely useful technical references.
Check Old Packaging
Hotel key card boxes may include:
Product codes
RFID technology
Part numbers
Supplier references
Batch information
Check Previous Purchase Orders
Previous quotations, invoices or email conversations may contain the exact credential description.
An old purchasing record can be considerably more informative than staring intensely at a blank white card.
Can You Identify an Onity Key Card From a Photo?
Sometimes.
If the card or packaging contains a clear model number, chip reference or product code, photographs may be enough to narrow down the credential.
A plain customized hotel card may provide very little technical information.
Different RFID chips can be laminated inside cards that look identical externally.
For better identification, provide photographs of:
Card front
Card back
Packaging
Door lock
RFID encoder
Software screen where appropriate
If the specification remains uncertain, a physical working sample may be necessary.
Can Any MIFARE Card Work With Onity?
No.
Even though current Onity Trillium RFID locks support several MIFARE families, this does not mean any random MIFARE card will work with a specific hotel installation.
The hotel’s configured credential type still matters.
A compatible credential may involve:
Correct RFID chip
Correct memory characteristics
Approved card configuration
Compatible encoding
Correct system security settings
Always verify the existing system.
Can Generic RFID Cards Work With Onity?
Potentially, depending on the hotel installation and credential requirements.
However, buyers should distinguish between two concepts.
RFID Hardware Compatibility
The card may contain an RFID chip technically readable by the lock hardware.
Complete Hotel Credential Compatibility
The card can be correctly issued by the hotel’s Onity system and used as an authorized credential.
These are not always the same thing.
A blank chip card does not automatically become a functioning hotel room key simply because the lock can technically communicate with that chip family.
Onity Legacy Hotel Lock Systems
One important issue with Onity is the large installed base of older hotel locking systems.
Hotels do not replace every door lock every time a newer product is released.
Existing properties may therefore continue operating older Onity installations for many years.
That makes legacy compatibility important.
Before ordering cards for an older hotel, collect:
Installation age
Existing lock model
Existing credential
Encoder
Management software
Previous card specifications
Never assume a current Trillium card specification applies to every older Onity lock.
Upgrading From Magnetic Stripe to RFID
Some hotels may still operate older magnetic stripe locking systems.
Onity offers upgrade paths for certain existing installations to move toward RFID technology.
Trillium is designed to provide an upgrade path for properties with certain Onity HT and ADVANCE installations.
For these projects, replacing the card is only part of the upgrade.
The hotel may need changes to:
Lock readers
Electronics
Access management system
Encoders
Credential inventory
Staff procedures
A magnetic stripe to RFID migration should therefore be treated as a system project rather than a card purchasing exercise.
Onity DirectKey Mobile Access
Onity also provides DirectKey mobile access technology.
DirectKey allows compatible hotel systems to deliver digital room credentials to a guest’s mobile device.
Guests can then use their phone for access to areas such as:
Guest rooms
Parking
Elevators
Other authorized hotel spaces
DirectKey can operate alongside Onity physical credential systems.
Does Mobile Access Replace Onity Key Cards?
Not necessarily.
Hotels can support both physical cards and mobile credentials.
Physical Onity hotel cards remain useful for:
Guests without smartphones
Guests who prefer a physical card
Group bookings
Families
Children
Conference attendees
Backup credentials
Staff operations
For many properties, mobile access expands the available guest options rather than eliminating cards completely.
Onity Key Card Materials
Once technical compatibility has been established, hotels can consider the physical material of the credential.
Possible options include:
Material selection should happen after the RFID specification is confirmed.
The order should be:
Credential first. Material second. Design third.
A beautiful environmentally friendly card is of limited practical value if the door remains firmly closed.
PVC Onity Hotel Key Cards
PVC remains a widely used material for hotel RFID cards.
Advantages include:
Stable dimensions
Good printing performance
Durability
Cost-effective mass production
Multiple surface finishes
Familiar guest handling
PVC can be suitable for both economy and premium hotels depending on the printing and finishing design.
Recycled Plastic Onity Key Cards
Hotels seeking to reduce the use of virgin plastic may consider recycled plastic credential constructions where technically appropriate.
Recycled card materials can retain a familiar card format while supporting sustainability goals.
Hotels should still verify:
Dimensional stability
Print quality
RFID performance
Encoder compatibility
Durability
before changing materials.
Can Wooden RFID Cards Work With Onity?
Potentially, if the correct Onity-compatible RFID credential can be integrated into the wooden construction.
Wooden cards can be attractive for:
Resorts
Eco hotels
Boutique properties
Luxury lodges
Beach hotels
Glamping sites
However, testing is essential.
Verify:
Encoding
Room lock reading
Common area access
Card thickness
Encoder handling
RFID read stability
Moisture resistance
Surface durability
The internal RFID antenna design can also affect performance.
Bamboo Onity Hotel Key Cards
Bamboo is another option for hotels looking for a natural material aesthetic.
Bamboo RFID cards can support:
Printing
Laser engraving
Hotel branding
QR codes
Other customization
The appropriate RFID inlay and card construction must still match the installed Onity system.
Paper RFID Hotel Key Cards
Paper-based RFID hotel key cards can be suitable for properties looking to reduce conventional plastic use.
When considering paper cards, evaluate:
Expected guest stay
Humidity
Water exposure
Card reuse
Surface protection
Printing durability
A short-stay urban hotel and a tropical beach resort do not subject a card to quite the same existence.
Standard Onity Hotel Key Card Size
Many hotel RFID credentials use the standard CR80 card format, approximately:
85.60 × 53.98 mm
This is similar to a conventional bank card.
However, custom material constructions may differ in thickness.
Thickness matters particularly when cards are used with:
Front desk encoders
Card printers
Self-service kiosks
Automated card dispensers
Card holders
Test the complete hotel workflow when moving to a non-standard material.
Custom Printed Onity Hotel Key Cards
After compatibility is confirmed, hotel key cards can be customized with branding and guest information.
Common elements include:
Hotel logo
Property name
Brand colors
Wi-Fi information
Website
QR code
Restaurant promotion
Spa information
Check-out time
Loyalty program
Social media
Emergency information
For hotel groups, cards can also be adapted for multiple properties while maintaining consistent brand standards.
Printing and Finishing Options
Depending on card material, customization can include:
Full-color CMYK printing
Pantone colors
Matte finish
Glossy finish
Metallic foil
Spot UV
QR codes
Barcodes
Serial numbers
Variable data
Laser engraving
Artwork and technical specifications should both be approved before mass production.
QR Codes on Onity Hotel Key Cards
A QR code can be printed on an RFID hotel key card independently from the RFID credential.
Hotels can use QR codes to link guests to:
Wi-Fi access
Digital menus
Room service
Spa reservations
Hotel applications
Digital guest directories
Local travel guides
Loyalty programs
Express check-out
The RFID chip controls compatible hotel access.
The QR code provides a separate visual digital interaction.
Both can be used together.
Guest Cards vs Staff Cards
Hotels should also consider the difference between guest and staff credentials.
Guest Credentials
Guest cards may be programmed for:
Specific room
Check-in and check-out dates
Guest elevators
Pool
Gym
Parking
Other permitted areas
Staff Credentials
Staff cards may require:
Multiple rooms
Multiple floors
Housekeeping access
Engineering areas
Offices
Back-of-house spaces
Longer validity
Shift-based permissions
The credential and access setup should match the user’s role.
How to Test Replacement Onity Key Cards
Testing should be completed before approving a large custom card order.
Step 1: Identify the Onity System
Confirm:
Lock model
Access management software
Encoder
Step 2: Confirm the RFID Credential
Verify:
Chip family
Exact chip where possible
Existing credential specification
Step 3: Encode a Test Card
Use the hotel’s normal Onity software and encoder.
A generic RFID reader test is not enough.
Step 4: Test Several Guest Rooms
Use multiple locks.
Testing only one door does not prove the entire property configuration.
Step 5: Test Common Areas
Where applicable, test:
Elevator
Main entrance
Gym
Pool
Lounge
Parking
Step 6: Test Validity Periods
Confirm normal check-in and check-out behavior.
Step 7: Test Re-Issuing
For reusable cards, perform multiple encoding cycles.
Step 8: Test Physical Durability
Check:
Bending
Scratching
Moisture
Printing
Surface wear
Step 9: Test Alternative Materials
If changing from PVC to wood, bamboo or paper, test the new card through the complete operational process.
Step 10: Keep a Golden Sample
Keep an approved card as the reference for production and future repeat orders.
Onity Key Card Compatibility Checklist
| Item | Information to Confirm |
|---|---|
| Lock brand | Onity |
| Lock model | Trillium, ADVANCE Trillium, legacy model, etc. |
| Management system | OnPortal or existing system |
| Existing card | Working reference available |
| RFID chip | Confirmed |
| Credential family | Classic, Plus, Ultralight, etc. |
| Encoder | Model confirmed |
| Guest or staff | Confirm application |
| Material | PVC, recycled plastic, wood, paper, etc. |
| Size | Standard or custom |
| Printing | Artwork approved |
| Sample | Encoded and tested |
| Bulk production | Start after approval |
Common Onity Hotel Key Card Buying Mistakes
Ordering by Brand Only
“Onity card” is not a complete specification.
Assuming Every Onity Lock Uses the Same Chip
Current Trillium RFID alone supports several different MIFARE technologies.
Ordering by Frequency Alone
13.56 MHz does not guarantee compatibility.
Assuming Every MIFARE Card Is Interchangeable
MIFARE is a product family, not one universal credential.
Ignoring Legacy Systems
Older hotels may continue to operate earlier Onity hardware and software.
Changing From Classic to Plus Without System Review
Onity supports an enhanced-security migration path, but it should be treated as a system configuration change.
Testing With Only a Phone or RFID Reader
A generic reader cannot replicate OnPortal, the encoder and the hotel lock workflow.
Ordering Before Testing
Large quantities are excellent for unit pricing and considerably less charming when the cards do not open anything.
What Information Should You Send for an Onity Key Card Quote?
Provide as much of the following as possible:
Lock Brand:
Onity
Lock Model:
Trillium / ADVANCE Trillium / Legacy / Unknown
Access Software:
OnPortal / Other / Unknown
Existing Card:
Photos attached
RFID Chip:
If known
Existing Card Packaging:
Photo or product reference
Encoder:
Model or photographs
Material Required:
PVC / Recycled PVC / Wood / Bamboo / Paper / Other
Card Size:
CR80 or custom
Printing:
Single-sided or double-sided
Special Finish:
Matte / Glossy / Foil / Spot UV / Other
Variable Data:
QR code / Barcode / Serial number
Order Quantity:
Required quantity
Annual Demand:
If applicable
Delivery Destination:
Country and city
Sample Testing:
Required
This information allows the supplier to evaluate the project rather than simply guess from a brand name.
How to Choose an Onity Hotel Key Card Supplier
Hotel key card manufacturing combines RFID technology with printing and physical card manufacturing.
A suitable supplier should understand:
RFID chips
Hotel access credentials
RFID inlay construction
Card manufacturing
Alternative materials
Custom printing
Variable data
Quality control
Sample testing
Repeat production
For replacement projects, the supplier should ask questions about the installed Onity system before claiming compatibility.
Technical caution before production is considerably cheaper than technical confidence after 30,000 cards have already been printed.
How GSRFID Supports Onity Hotel Key Card Projects
GSRFID manufactures customized RFID hotel key cards and credential products for:
Hotels
Resorts
Hotel groups
Hospitality distributors
Hotel equipment suppliers
Access-control integrators
RFID solution providers
Available physical credential options include:
PVC RFID hotel key cards
Recycled plastic key cards
Wooden RFID hotel key cards
Bamboo RFID cards
Paper RFID cards
Other customized RFID credentials
Customization options can include:
Hotel logos
Full-color printing
Pantone colors
QR codes
Barcodes
Serial numbers
Variable data
Matte finish
Glossy finish
Metallic foil
Spot UV
Laser engraving
Custom packaging
For Onity replacement-card projects, provide the installed lock and existing credential information whenever possible.
If compatibility cannot be confidently confirmed from available information, sample testing should take place before mass production.
Frequently Asked Questions
What RFID cards does Onity use?
Current Onity Trillium RFID locks support several MIFARE credential technologies, including MIFARE Classic, MIFARE Plus, MIFARE Ultralight and MIFARE Ultralight C.
What RFID frequency do Onity hotel cards use?
Current Onity contactless MIFARE credential environments operate at 13.56 MHz. However, frequency alone does not determine compatibility.
Can any 13.56 MHz RFID card work with Onity?
No. The RFID chip, credential configuration and installed Onity system must also be compatible.
Can any MIFARE card work with Onity?
No. MIFARE includes multiple chip families and generations. The hotel’s approved credential specification should be confirmed.
Does Onity support MIFARE Classic?
Yes. Current Trillium RFID specifications list MIFARE Classic among supported credentials.
Does Onity support MIFARE Plus?
Yes. Trillium RFID supports MIFARE Plus, and Onity offers MIFARE Plus as an enhanced credential security option.
Does Onity support MIFARE Ultralight?
Yes. Current Onity Trillium RFID and OnPortal encoder information list MIFARE Ultralight support.
Does Onity support MIFARE Ultralight C?
Yes. MIFARE Ultralight C is also listed among the supported Onity RFID credential technologies.
Can Onity hotels upgrade from MIFARE Classic to MIFARE Plus?
Onity provides an enhanced-security upgrade path for compatible Trillium RFID installations. Hotels should verify the required system configuration before changing credentials.
What is OnPortal?
OnPortal is Onity’s hotel lock and access management platform. It manages physical and mobile credentials and works with RFID encoders for guest card issuing.
What is Onity DirectKey?
DirectKey is Onity’s mobile credential technology, allowing guests in compatible hotel systems to use a smartphone as an access credential.
Can hotels use physical Onity cards and mobile keys together?
Yes. OnPortal and DirectKey environments can support both physical and mobile credential workflows.
Can wooden RFID cards work with Onity?
Potentially, provided the correct RFID credential can be integrated into the wooden card and the finished product passes actual hotel compatibility testing.
Can QR codes be printed on Onity hotel key cards?
Yes. A QR code can be printed on the card independently from the RFID access function.
How do I identify an unknown Onity key card?
Check the lock model, management software, RFID encoder, current working card, existing card packaging and previous purchase records.
Should replacement Onity cards be tested before bulk production?
Yes. The card should be encoded using the actual hotel system and tested on guest rooms, relevant common areas and normal check-in and check-out workflows.




